The teethers are made from PE plastic which are BPA free. They measure approximately 55mm by 48mm (including the sewn in edge) and can be sewn through to attach them to your design between two fabric pieces.
All our products have passed the EN71 Safety Standard Tests. Please remember this is a component and should not be given to a child until it is firmly secured to a finished design that has passed the EN71 tests and a technical file has been completed.
All our products have passed the EN71 Safety Standard Tests. The sewn in teethers are available in the following 3 colours; Green, Red and Yellow.
The plastic teether range have been tested to be washed on a 30 degree wash only and a cool tumble setting only, otherwise the excessive heat will distort the plastic teether. Best practice is to air dry any product fitted with a plastic teether.
We have tested all these products on a sewing machine and found it worked best with a slower speed; however, you use the machine at your own risk and Tactile Treasures Limited take no responsibility if the machine gets damaged or causes injury.
Save money with bulk discounts!
Cost per unit
Your saving per unit